User Manual for Oscar GNSS Receiver v2.4
110
7. If the DataAutoSave function is turned on, the static data is recorded
automatically in the internal storage when power up Oscar next time. You
can download data file refer to section 2.3.
4.4Tilt survey and stakeout
Tilt function is only applicable for Oscar GNSS receiver Ultimate version under
rover mode.
4.4.1 Tilt initialization
The tilt compensation of Oscar GNSS receiver Ultimate version is free of
complex calibration. The tilt compensation will be initialized when the surveyor
walks forward naturally for several meters after turning on the tilt compensation
function. You can start tilt survey right after you walk to the survey point.
There are two methods to turn on or off tilt compensation. One is turning on or
off tilt compensation on Device Info on the OLED via buttons. Another method
is through Nuwa app. After the Oscar GNSS receiver Ultimate version is
connect in Nuwa app, and we configure it working as a Rover. Click the device
icon on the top or click [Device] under the device functional group to enter
the device information interface. Turn on the [Tilt Enable] on the device
interface.
When tilt function is turned on, the tilt LED on the Oscar Ultimate OLED display
lights on with steady red, a few seconds later it starts flashing red. At this time,
walk a few steps ahead, tilt the pole at any direction, then the tilt LED turns
To Next Page
