User Manual Version 2.4 – 20220419
Revision History
Change Yellow&Blue LED to Green LED for Oscar Basic;
Add eBubble in section 2.2.2; Update section 1.3.3;
Update section 2.4.1; Update section 4.4.
Update section 2.4.1, add section 4.4 for tilt function, add
table 3.4 for internal radio.
Add notice of WEEE; Add view description for LEMO
connectors; Add registration steps in section 2.2.2;
Update logo picture.
Add section 2.5 for web UI.
Update section 2.4.1 for firmware upgrade; Update table
3.4 for configuration of internal radio; Update section 4.4
for the LED status of tilt measurement; Update section 4.5
issues and solutions.
Update website links in table 0.1 and section 2.4.1; Add a
note for firmware upgrade; Add pin definition of TNC
connector and battery contacts; Update section 2.3 Data
download; Update table 3.1.
Update section 2.4.1 for firmware upgrade,add 2.5 Web
UI(User Interface);Add Table3.8 Transmitter distance
(Typical);Add Vibration:MIL-STD-810G,FIG.514.6C-1.
Add section2.2.1.1 panel options and operation
introduction; upgrade section 2.2.2.3 scan code & 3.1
Technical specifications
Add section 2.6 battery change mode; upgrade section2.5
Web UI
Upgrade section3.4 & 1.3.4 & 3.1 & 2.4.2
Add section 2.1.4 Oscar external power supply; add
section 2.2.2.5 configure NMEA via serial port