18 TD410023-B RLF
2
1
2
1
4
3
ENGINE DISASSEMBLY
SECURING THE ENGINE
WARNING! Spinal column injury caused by
incorrect lifting of heavy loads. Always lift the
engine using a workshop crane.
NOTICE! Breakage. Lift the engine only using the
brackets.
Depending on the engine model, use the
brackets
1
and
2
or
3
and
4
.
1. Lift the engine using the brackets until the
engine is mounted on the engine stand.
Observe the references in the chapters.
REMOVING ENGINE FROM THE VEHICLE
1. Remove the engine from the vehicle. (See the
vehicle manufacturer‘s documentation.)
1. Mount the engine across from the drive side on
the engine stand.
Suitable mounting points M10:
– Screw-in depth
1
and
2
30 mm
MOUNT THE ENGINE ACROSS FROM THE DRIVE SIDE
To Next Page
Loading...
