21TD410023-B RLF
1
2
1
2
1
2
ENGINE DISASSEMBLY
1. 5 mm: Remove eight bolts
1
.
2. Remove the valve cover
2
.
Observe in section C Additional working
instructions the chapters Valve cover
disassembly and Valve cover reassembly.
REMOVING VALVE COVER
1. 5 mm: Remove four bolts
1
.
2. Remove two ignition coils
2
.
REMOVING IGNITION COILS
REMOVING SPARK PLUGS
WARNING! Irritations and eye injuries can be
caused by blown out dirt and particles. All
persons in the surrounding area must wear
protective glasses.
1. Blow out two spark plug bores
2
with
compressed air.
2.
16 mm: Screw in two spark plugs
1
using
a spark plug wrench.
To Next Page
Loading...
