Textron MPE 850 OFF-ROAD - Valve Cover Disassembly; Removing Camshaft Sensor; Valve Cover Reassembly; Installing Camshaft Sensor

67TD410023-B RLF
6
5
1
2
1
2
ADDITIONAL WORKING INSTRUCTIONS
4. Hold the throttle body
5
in position.
5. Close the screw clamp
6
according to the
specification Screw clamps. (See section D
Tightening torques und assembly instructions.)
1.
5 mm: Remove the bolt
1
.
2. Remove the sensor
1
.
REMOVING CAMSHAFT SENSOR
1. Coat the o-ring on the sensor
2
lightly with
petroleum jelly.
2. Insert the sensor.
3.
5 mm: Install the bolt
1
according to the
specification Other bolts M6 Standard. (See
section D Tightening torques und assembly
instructions.)
VALVE COVER REASSEMBLY
VALVE COVER DISASSEMBLY
INSTALLING CAMSHAFT SENSOR
C