71TD410023-B RLF
3
4
5
6
7
1
ADDITIONAL WORKING INSTRUCTIONS
5. Remove the spring cup
3
, valve spring
4
and spring pad
5
.
6. Remove the valve
6
.
7. Remove the valve stem seal
7
using the
valve stem seal remover.
8. Repeat the procedure with the other valves.
REMOVING FUEL RAIL
Only remove the fuel rail if the cylinder head,
the injectors or the fuel rail must be replaced.
WARNING! Burn injuries caused by ignited
fuel. Fuel is highly flammable. Leaks in the
fuel system can lead to burns and vapors may
ignite and cause an explosion.
1.
T30: Remove two bolts
1
.
To Next Page
Loading...
