Textron MPE 850 OFF-ROAD - Cylinder Head Disassembly; Removing Knock Sensor; Removing Brackets and Oil Pressure Switch

69TD410023-B RLF
2
3
1
2
1
7
6
4
5
ADDITIONAL WORKING INSTRUCTIONS
CYLINDER HEAD DISASSEMBLY
REMOVING BRACKETS AND OIL PRESSURE SWITCH
REMOVING KNOCK SENSOR
Only valid for engine model 409135 I2 846 UTV
NA-80.
The knock sensor is not installed in each engine.
Observe the references in the spare parts catalog.
1.
6 mm: Remove the bolt
2
.
2. Remove the sensor
1
.
1.
5 mm: Remove the bolt
2
.
2. Remove the bracket
1
.
3.
24 mm: Remove the oil pressure
switch
3
.
Depending on the engine model, remove the
brackets
4
and
5
or bracket
8
.
4.
5 mm: Remove the bolt
6
.
5. Remove the bracket
5
.
6.
5 mm: Remove two bolts
7
.
7. Remove the bracket
4
.
C