Textron MPE 850 OFF-ROAD - Installing Starter

60 TD410023-B RLF
2
3
1
7
4
5
6
ENGINE REASSEMBLY
INSTALLING STARTER
1. Hold the bracket
1
in position.
2.
5 mm: Install the bolt
2
according to the
specification Other bolts M6 Standard. (See
section D Tightening torques und assembly
instructions.)
3. Replace the o-ring
3
and lightly coat with
petroleum jelly.
4. Hold the starter
5
in position.
5.
T30: Screw in the bolt
4
lightly. Do not
tighten.
6.
8 mm: Install two bolts
6
according to the
specification Other bolts M10 Standard. (See
section D Tightening torques und assembly
instructions.)
7.
T30: Install the bolt
7
according to the
specification Other bolts M6 Standard. (See
section D Tightening torques und assembly
instructions.)
B