73TD410023-B RLF
3
4
5
2
1
3
ADDITIONAL WORKING INSTRUCTIONS
WARNING! Burn injuries caused by ignited
fuel. Fuel is highly flammable. Leaks in the
fuel system can lead to burns and vapors may
ignite and cause an explosion.
5. Coat two o-rings
4
lightly with lubricant for
o-ring injectors.
6. Insert the fuel rail
3
.
7.
T30: Install two bolts
5
according to the
specification Other bolts M6 Standard. (See
section D Tightening torques und assembly
instructions.)
INSTALLING VALVES
1. Replace the valve stem seal
2
.
2. Install the valve stem seal using the valve stem
seal installation spike
1
.
3. Coat the valve stem
3
lightly with engine oil.
4. Insert the valve.
When valves and cylinder heads are replaced by
new parts, the following step can be omitted.
5. Grind in the valve using the valve refacer.
To Next Page
Loading...
