Thermo 48i - Page 90

Operation
Instrument Controls Menu
3-68 Model 48i Instruction Manual Thermo Electron Corporation
Decimal Places The Decimal Places screen allows the user to select how many digits are
displayed to the right of the decimal, from 0 to 6, with a default of 2.
• In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Input Config > Select Channel > Decimal Places.
• Use and to increment or decrement the value.
• Press to save the new value.
• Press to return to the Analog Input Config menu or to
return to the Run screen.
Number of Table Points The Number of Table Points screen allows the user to select how many
points are used in the conversion table. The points range from 2 to 10, with
a default of 2.
XXLO WCONCENTRATIONXXLO W
CO 15.80 PPM
SAMPLE 12:34 ALARMx
ANALOG INPUT UNITS:
ASSSSSSSSSSSS
ABCDEFGHIJKLMN BKSP
OPQRSTUVWXYZ PAGE
0123456789 ./- SAVE
RANGE AVG DIAGS ALARM
XXLO WCONCENTRATIONXXLO W
CO 15.80 PPM
SAMPLE 12:34 ALARMx
DECIMAL PLACES:
CURRENTLY: 2
SET TO: 3 ?
©ª INC/DEC


 SAVE VALUE
RANGE AVG DIAGS ALARM