To Next PageTo Next PageWhat does M- SHORTED mean on my Tomberlin Offroad Vehicle?
If your Tomberlin Offroad Vehicle displays 'M- SHORTED', it means the inner M- is short circuit to B-. This is likely due to a broken controller.
What to do if my Tomberlin Offroad Vehicle displays a LOW BATTERY VOLTAGE?
If your Tomberlin Offroad Vehicle displays a 'LOW BATTERY VOLTAGE' error, it could be due to low voltage in the battery. This might be because the voltage is too low, the battery connection is corroded, or the battery or controller terminals are loose. Consider checking these possible causes.
What does KEY SWITCH SRO mean on my Tomberlin 2010 E-Merge?
If your Tomberlin Offroad Vehicle displays 'KEY SWITCH SRO', it indicates a key switch SRO failure. This could be due to an interlock issue on the key switch or an incorrect order delay.
What does AUX CONT DN mean on my Tomberlin 2010 E-Merge Offroad Vehicle?
If your Tomberlin Offroad Vehicle displays 'AUX CONT DN', it means the auxiliary contactor is open. This can be caused by a short circuit in the driving of the auxiliary contactor.
What does MAIN DROPOUT mean on my Tomberlin 2010 E-Merge?
If your Tomberlin Offroad Vehicle displays 'MAIN DROPOUT', it indicates that the main contactor is open, suggesting that the main contactor is broken.
What does MAIN COIL FAULT mean on my Tomberlin Offroad Vehicle?
If your Tomberlin Offroad Vehicle displays 'MAIN COIL FAULT', it means the coil of the main contactor has failed. This is possibly due to the coil being open or disconnected.
What does MAIN DRIVER ON mean on my Tomberlin Offroad Vehicle?
If your Tomberlin Offroad Vehicle displays 'MAIN DRIVER ON', it suggests that the drive input of the main contactor has less currency. This could be due to a main contactor failure or open circuit, or a broken controller. Check these components.
What does WELDED AUX CONT mean on my Tomberlin Offroad Vehicle?
If your Tomberlin Offroad Vehicle displays 'WELDED AUX CONT', it indicates that the auxiliary contactor is welded. This can occur if the auxiliary contactor is welded or the drive of the auxiliary contactor is shorted.
What does MAIN WELDED mean on my Tomberlin 2010 E-Merge Offroad Vehicle?
If your Tomberlin Offroad Vehicle displays 'MAIN WELDED', it means the main contactor is welded. This can happen if the main contactor is indeed welded or if the drive of the main contactor is shorted. Check these components.
What to do if my Tomberlin 2010 E-Merge Offroad Vehicle displays SPEED SENSOR FAULT?
If your Tomberlin Offroad Vehicle displays 'SPEED SENSOR FAULT', it indicates a speed sensor failure. This could be due to no connection on the speed sensor or the speed sensor being broken. Check the connection and the sensor itself.
Essential safety measures for vehicle maintenance and operation.
Guidelines on selecting and using correct tools for maintenance tasks.
Important warnings and advice for maintenance procedures.
Schedule and procedures for routine vehicle upkeep.
Specific points and recommended lubricants for periodic maintenance.
Detailed steps for inspecting and measuring the vehicle's braking components.
Procedures for checking steering wheel play and linkage condition.
Steps to measure and adjust the vehicle's toe-in for proper alignment.
Procedures for inspecting front and rear wheel bearings for wear and play.
Method for inspecting shock dampers for oil leaks and spring condition.
Steps to check the binding force and buckle security of seat belts.
Instructions for removing the vehicle's canopy and associated rods.
Steps for detaching the vehicle's pillars for access or replacement.
Procedure for removing and installing the front bumper assembly.
Steps for removing the rear tray and rear bumper components.
Instructions for disassembling and removing seat cushions and backrests.
Procedures for removing the dashboard and front cover panels.
Steps to remove the vehicle's rear cover and associated components.
Exploded view and part identification for the front axle system.
Detailed steps for removing, inspecting, and testing front axle components.
Exploded view and part list for the driving axle system.
Procedures for removing, inspecting, and testing the driving axle and its parts.
Steps for disassembling and removing the gearbox and differential gear.
Identification of various brake system parts through an exploded view.
Procedures for measuring brake pedal free play and removing the pedal assembly.
Steps to measure parking brake handle free play and inspect the cable.
How to inspect the accelerator pedal's operating condition and free travel.
Exploded view and list of parts for the vehicle's steering system.
Detailed instructions for removing the steering wheel, column, and stalk.
Procedures for removing the steering gear and its internal components.
Steps for removing and installing the vehicle's key switch.
Procedures for removing and installing the forward/reverse gear selector switch.
Instructions for removing and installing headlights, tail lights, and indicators.
Steps for removing and installing the electric motor and controller unit.
Procedures for battery removal, installation, and DC converter operations.
Guide to diagnose and fix common vehicle starting and performance issues.
Interpretation of controller error codes for diagnosing faults.
List of diagnostic checks for electrical system components.
Information on battery types, common issues, and preventative maintenance.
Step-by-step guide for safely replacing the vehicle's battery.
Instructions for proper battery charging, deep discharge, and storage.
Diagnostic procedures including voltage, hydrometer, and discharge tests.
Guide to operating, troubleshooting, and maintaining the vehicle's battery charger.
General information and external checks for the electric traction motor.
Procedures for testing internal short circuits and open circuits in the motor.
Steps for removing the motor and disassembling its components like armature and brushes.
Detailed inspection of armature, windings, commutator, and bearings.
Instructions for reassembling the electric motor and mounting it to the axle.
Procedures for checking and replacing the electric motor's speed sensor.
General| Brand | Tomberlin |
|---|---|
| Model | 2010 E-Merge |
| Category | Offroad Vehicle |
| Language | English |
