Topcon AP-L1A - Page 118

19. SPECIAL ACCESSORIES
19-2
Data terminal holder type 1 for FS/2
This is exclusive holder to set FS/2 to
commercial pole.
 Pole diameter : 26-30mm
Prism unit case, Model 3
This is the plastic case to store and carry
various sets of prisms.
The case covers one of the following prism
sets:
1) Tilt single prism set
2) Tilt single prism set with a target plate
 External dimensions:
427(L) 254(W) 242(H) mm
 Weight:3.1kg
Gadget case, Model 1
A case to store and carry accessories.
 External dimensions:
300(L) 145(W) 220(H) mm
 Weight:1.4kg
Back pack, Model 2
Convenient for use in mountainous terrain.
Prism unit case, Model 6
Fixed 9 prisms unit can be stored in this case.
Especially, this is a very easy case to carry.
Soft material is used.
 External dimensions:
250(L) 120(W) 400(H) mm
 Weight:0.5kg
Prism unit case, Model 5
1 prisms unit can be stored in this case.
Especially, this is a very easy case to carry.
Soft material is used.
 External dimensions:
200(L) 200(W) 350(H) mm
 Weight:0.5kg
Wide-frame extension leg tripod,
Type E (Wood)
 Flat head 5/8"  11 threads with
adjustable legs.