Topcon AP-L1A - Table of Contents

6
CONTENTS
General Handling Precautions
..................................................................................................
1
Display for Safe Use
...................................................................................................................... 3
Safety Cautions
................................................................................................................................
3
Laser Safety
.......................................................................................................................................
4
Standard Set composition
........................................................................................................
10
1. NOMENCLATURE AND FUNCTIONS
..................................................................
1-1
1.1 Nomenclature
.....................................................................................................................
1-1
1.2 Display Marks
.....................................................................................................................
1-3
1.3 Operating Key
.....................................................................................................................
1-4
1.4 Function Key (Soft Key)
....................................................................................................
1-5
1.5 Connection with Computer
...............................................................................................
1-7
1.6 Installing Wireless Terminal WT-1A/1B & Data Terminal FS/2
(Optional Accessories)
......................................................................................................
1-8
1.6.1 Setting Wireless Modem (AP-L1A only)
..........................................................
1-8
1.6.2 Setting Place of AP-L1A and Wireless Terminal WT-1A/1B
.......................
1-9
1.7 Data Output
.........................................................................................................................
1-9
1.8 Rotating Method of AP-L1A
...........................................................................................
1-10
1.8.1 Rotating of AP-L1A by H/V Shuttle and H/V Jog
.........................................
1-10
1.8.2 Using Software Key to Rotate AP-L1A
..........................................................
1-10
1.8.3 Auto Inversion Key
............................................................................................
1-11
1.8.4 Telescope Rotating Free Lever and Horizontal Rotating
Free Lever
...........................................................................................................
1-11
 Attaching Precaution Label
..............................................................................
1-11
2. PREPARATION FOR MEASUREMENT
..............................................................
2-1
2.1 Setting instrument up for measurement
........................................................................
2-1
2.2 Connecting Power Supply
................................................................................................
2-1
2.3 POWER Switch Key ON
.................................................................................................
2-3
2.4 Battery Power Remaining Display
..................................................................................
2-4
2.5 Vertical and Horizontal Angle Tilt Correction
................................................................
2-5
2.6 The Lay Position of Multiple Prisms
...............................................................................
2-7
2.7 Inclination of Prism and Measuring Error
......................................................................
2-7
3. AUTOMATIC TRACKING MODE
.............................................................
3-1
4. ANGLE MEASUREMENT
..........................................................................
4-1
4.1 Measuring Horizontal Angle Right and Vertical Angle
................................................
4-1
4.2 Switching Horizontal Angle Right/Left
............................................................................
4-2
4.3 Measuring from the Required Horizontal Angle
...........................................................
4-3
4.4 Rotating automatically to a required Horizontal and Vertical angle
..........................
4-4