Configuration
Topcon HiPer Lite and HiPer Lite+ Operator’s Manual
2-34
receiver). With FH modems, a point-to-multipoint network
can be used, where a single transmitter broadcasts data to
multiple remote radios. When establishing the radio
communications, ensure that;
–the transmitter and remote receiver(s) in the same
network use the same channel number. Otherwise, a
radio connection will not be established.
–networks in the same location are assigned to different
channel numbers. Otherwise, networks in close
proximity will interfere with each other, and radio
communication may fail.
Figure 2-27. Modem-TPS Radio Link Tab
To Next Page
Loading...
