Toro Multi Pro 1750 - Assembling the Agitation Throttle Valve and Eductor-Shutoff Valve; Assembling the Agitation Throttle Valve

ConnectingtheElectricalConnectors
fortheRateValve,AgitationValve,and
Master-SprayValve
1.Connectthe3-pinvalveharnesslabeledMASTER-SPRAY
VALVEintothe3-socketconnectorforthemaster-spray
valve(Figure57).
Figure57
1.3-socketvalveharness
(master-sprayvalve)
4.3-pinadapterharness
(master-sprayvalve)
2.3-socketvalveharness
(agitationvalve)
5.3-pinadapterharness
(agitationvalve)
3.4-socketvalveharness
(rateswitch)
6.4-pinadapterharness
(rateswitch)
2.Connectthe3-pinvalveharnesslabeledAGITATION
VALVEintothe3-socketconnectorfortheagitation
valve(Figure57).
3.Connectthe4-pinvalveharnesslabeledRATEVALVE
intothe4-socketconnectorfortheratevalve(Figure
57).
12
AssemblingtheAgitation
ThrottleValveand
Eductor–ShutoffValvefor
MachineswiththeOptional
EductorKit
Partsneededforthisprocedure:
1Handle
1
Screw(6-32x5/8inch)
1Agitationthrottlevalve
1
Bracket(nylon)
1Agitation-valvebracket
4
Bolt(6x12mm)
1
Eductor-shutoffvalve
1
Eductor-shutoffbracket
4
Flangelocknut(1/4inch)
2
Flange-headbolt(5/16x3/4inch)
AssemblingtheAgitationThrottleValve
1.Assemblethehandletotheagitationthrottlevalve
(Figure58)withthescrew(6-32x5/8inch).
28