Toro Multi Pro 1750 - Installing the Agitation Supply Hose

Figure65
1.Returnhose—2.5x71cm(1x27-7/8inches)
3.Assemblethe90°barbedttingofthereturnhoseinto
therearportoftheinboardT-tting(Figure64).
4.Securethe90°ttingtotheT-ttingwiththeretainer
(large)thatyouremovedinstep1ofDisconnectingthe
Return,Sprayer-Supply,andBypassHoses(page14).
InstallingtheAgitationSupplyHose
1.Assemblethequick-connecttting(straightbarbed)of
theagitationsupplyhose—2.5x72cm(1x28-1/4
inches)ontothequickcouplingoftheagitationcontrol
valvewiththeretainerthatissuppliedwiththehose
(Figure66).
Figure66
1.Retainer
4.Quick-connecttting
(agitationthrottlevalve)
2.Quick-connecttting
(agitationcontrolvalve)
5.Agitationsupplyhose—2.5
x72cm(1x28-1/4inches)
3.Quick-connecttting
(straightbarbed)
2.Routethehosetotheagitationthrottlevalve(Figure
67).
32