Toro Multi Pro 1750 - Installing the Shutoff Valve and Hoses for the Optional Spray Gun; Repositioning the Section Bypass Valves

Figure82
1.Outerboomsection
4.Hoseclamp
2.Supplyhose(outer-boom
section)
5.R-clamp
3.BarbedT-tting
4.Assembletherightboom-supplyhoseontothe
T-ttingattheright-boomsection(Figure82).
5.SecurethehosetotheT-ttingwithahoseclampthat
youremovedinstep1ofRemovingtheBoom-Section
Hoses(page11).
6.Repeatsteps3through5fortheleftboom-supplyhose
attheleft-boomsection.
17
InstallingtheShutoffValve
andHosesfortheOptional
SprayGunKitorElectric
Hose-ReelKit
Partsneededforthisprocedure:
1
Capandretrainer
1
Straightbarbedtting(1/2inch)
1
Quick-connecttting(socket)
2
Hoseclamp13to32mm(1/2to1-1/4inches)
1
Hose—1.3x762cm(1/2x300inches)
1
Hose—1.3x180cm(1/2x83inches)
2
2412-36Hoseclamp6to11mm(1/4to7/16inch)
1
Bypassshutoffvalve
1
Sectionbypasshose—2.5x146cm(1x57-1/2
inches)
RepositioningtheSectionBypass
Valves
1.Removetheretainerthatsecurestheplugtothe
socketedquick-connectttingofthebypassmanifold
(Figure83).
Note:RetaintheretainerforinstallationinInstalling
theSectionBypassHose—MachineswiththeOptional
SprayGunKitortheOptionalElectricHoseReelKit
(page46).
40