Toro Multi Pro 1750 - Page 46

InstallingtheSectionBypass
Hose—MachineswiththeOptional
SprayGunKitortheOptionalElectric
HoseReelKit
1.Assemblethebypassshutoffvalvetothequick-connect
socketofthebypassmanifold(Figure99)withthesmall
retainerthatyouremovedinstep1ofRepositioning
theSectionBypassValves(page40).
Note:Ensurethatthehandleofthebypassshutoff
valveisalignedasshowninFigure99.
Figure99
1.Bypass
manifold—quick-connect
socket
4.Retainer(small)
2.Bypassshutoffvalve5.Sectionbypasshose—2.5
x146cm(1x57-1/2
inches)
3.90°quick-connecttting
2.Assemblethe90°quick-connectttingofthesection
bypasshose—2.5x146cm(1x57-1/2inches)onto
thequickcouplingofthebypassshutoffvalvewiththe
retainer(small)thatissuppliedwiththesectionbypass
hose(Figure99).
3.Routethesectionbypasshosearoundtherightframe
channeltowardthebulkheadttinginthesprayertank
asshowninFigure100.
Figure100
1.Retainer(large)3.Bulkheadtting(sprayer
tank)
2.90°barbedtting4.Sectionbypasshose
4.Assemblethe90°barbedttingofthesectionbypass
hoseintothebulkheadtting(Figure100).
5.Securethe90°ttingtothebulkheadtting(Figure
100)withtheretainer(large)thatyouremovedinstep
1ofRemovingtheSectionBypassHose(page16).
46