Toro Multi Pro 1750 - Installing the Lower Sprayer Supply Hose

InstallingtheLowerSprayerSupply
Hose—MachineswiththeOptional
EductorKit
1.Assemblethestraightbarbedttingofthelowersupply
hose—25x66cm(1x25-3/4inches)intotheportof
theeductor-shutoffvalve(Figure73).
Figure73
1.Retainer(small)3.Straightbarbedtting
2.Port(eductor-shutoff
valve)
4.Lowersupplyhose—25x
66cm(1x25-3/4inches)
machineswiththeoptional
eductorkit
2.Securethebarbedttingtotheportwitharetainer
3.Routethesprayersupplyhosedownandtowardthe
T-ttinglocatedforwardofthepressure-reliefvalveas
showninFigure74.
Figure74
1.Lowersupplyhose—25x66cm(1x25-3/4inches)
4.Assemblethe90°barbedttingofthesprayersupply
hoseintotheforward,leftT-tting(Figure75).
Figure75
1.Retainer
4.Frontofthemachine
2.90°barbedtting(sprayer
supplyhose)
5.T-tting
3.Lowersupplyhose—25x
66cm(1x25-3/4inches)
6.Pressure-reliefvalve
5.SecurethebarbedttingtotheT-ttingwiththe
retainerthatyouremovedinstep3ofDisconnecting
theReturn,Sprayer-Supply,andBypassHoses(page
14).
36