Multi Pro 1750
Page 5 − 9
Electrical System
Splash Screen
When the ignition switch is turned from the OFF position
to the ON or START position, the fault indicator illumi-
nates for a few seconds to verify indicator operation and
the InfoCenter splash screen appears (Fig. 10). The
splash screen provides the following information to the
operator:
S Voltmeter
S Hourmeter
After the splash screen has been displayed for eight
seconds, the main information screen will be appear on
the InfoCenter. The only way to return to the splash
screen is by switching the key switch OFF then back ON.
MPH
gal/Ac
0.0
0
T
13.2V 0000.0
1. Fault indicator
2. Voltmeter
3. Hourmeter
Figure 10
1
2
3
SPLASH SCREEN
MAIN INFORMATION SCREEN
DISPLAY
AFTER
EIGHT
SECONDS
Electrical
System
To Next Page
Loading...
