Multi Pro 1750 Page 9 − 3 Ultra Sonic Boom Kit (Optional)
Precautions for Removing or Adjusting Spray System Components
1. Park vehicle on a level surface and apply the parking
brake.
2. Shut off the vehicle’s engine and remove the key
from the ignition switch.
3. Disengage all power and wait until all moving parts
have stopped.
4. Remove chemicals from pump, hoses and other
spray components. Thoroughly neutralize and rinse
spray system before loosening or removing any spray
system component(s).
5. Make sure spray system pressure is relieved before
loosening any system component.
Ultra Sonic
Boom (Opt.)
To Next Page
Loading...
