Multi Pro 1750
Page 5 − 11
Electrical System
Application Record Screens
Use the application record screens to view the area and
the amount of product sprayed since the screens were
cleared (Fig. 12). The first application record screen dis-
plays the total area and total amount of product sprayed.
The application record total screen is accessed from the
InfoCenter main information screen by pressing any
button once to expose the navigation pane, then press
the left/back button again (as indicated by the
in the
navigation pane).
The second application record screen displays the area
and the amount of product sprayed in the first of twenty
(20) sub areas. The application record sub area screen
is accessed from the application record total screen by
pressing the left/back button again (as indicated by the
in the navigation pane). Press center/down button to
display each additional sub area screen (as indicated by
the
in the navigation pane).
To clear the application record total (all sub areas),
press the right/forward button on the application record
total screen (as indicated by the
at the bottom of the
screen). To clear an application record sub area, press
the right/forward button on the application record sub
area screen (as indicated by the
at the bottom of the
screen).
To return to the previous screen, press the left/back but-
ton (as indicated by the
at the bottom of the screen).
Figure 12
APPLICATION RECORD TOTAL SCREEN
APPLICATION RECORD SUB AREA SCREEN
1
8
1. Total area applied
2. Total product applied
3. Left/back button
4. Center/down button
5. Right/forward button
6. Sub area number
7. Sub area applied
8. Sub area product applie
9. Navigation pane
0.15
Ac
5
gal
1
7
6
9
3
4
5
1.75
Ac
20
gal
2
9
Electrical
System
To Next Page
Loading...
