Toro Multi Pro 1750 - Service Brake Caliper Service

Multi Pro 1750Chassis Page 8 − 14
Service Brake Caliper Service
1. Bolt (2)
2. Caliper body
3. O−ring (4)
4. Caliper bracket
5. Square seal (2)
6. Dust seal (2) (if equipped)
7. Piston (2)
8. Brake pad (2)
9. Caliper anvil
Figure 8
2
3
6
8
1
5
7
4
(37 to 44 N−m)
27 to 33 ft−lb
BAF−12
Assembly
Lube
White
Lithium
Grease
9
NOTE: The Multi Pro 1750 front and rear service brake
calipers are identical.
NOTE: Early production Multi Pro 1750 service brake
brake caliper pistons use only a square seal. These
calipers do not include a piston dust seal.