Multi Pro 1750
Page 5 − 18
Electrical System
About Screen
The about screen (Fig. 21) identifies the machine model
number, serial number and software revision for the ma-
chine. If the correct personal identification number (PIN)
has been entered (see Settings Screen − Protected
Menus in this chapter), the InfoCenter software is dis-
played and the CAN−bus status will be visible. Press the
Center/down button to scroll through the screen items
(as indicated by the
at the bottom of the screen). The
information found in the about screen can be edited only
by your Toro Distributor.
To return to the previous screen, press the Menu/Back
button (as indicated by the
at the bottom of the
screen).
Figure 21
About
Model:
SN:
S/W Rev:
41188
314000129
122−0054J
1
1. About items
2. Left/back button
3. Center/down button
2
3
To Next Page
Loading...
