Toro Reelmaster 5010- H - Page 78

g036165
Figure53
1.LocationIDmodule2.IDmoduleconnector
6.Usingamultimeter,measureresistancesbetweenmoduleconnectorpinsasfollows:
IDModuleConnectorPins
Resistance
AandF15kohms
BandF10kohms
CandF
6.2kohms
DandF3.9kohms
EandF1.6kohms
Note:DonotremovethecoverofthelocationIDmodule.Therearenoreplaceablepartsunderthecover.
Pass
ThelocationIDmoduletestedgood.GotoStep3.
Fail
ThelocationIDmoduletestedbad.ReplacethelocationIDmodule.GotoReturningtheMachineto
Service(page22)andfollowthestepslisted.
Step3:TestthelocationIDmodulewiringinthemainharness.
1.InstallthelocationIDmodule.
2.Useamultimetertotestthefollowingpairsoflocationsfromcuttingreelmotorcableconnectors:
Note:TheexpectedreadingincludesthelocationIDmodulevalueandthewiring.
LocationHarness
Connector
Pin
Wire
Color
Expected
Reading
ConnectorGraphic
1MainP462Blue
2MainP472
Black
(48V
Ground)
1.6kohms
78