Toro Reelmaster 5010- H - Cooling System Maintenance

Fault32:UnknownCuttingUnitFault
InfoCenterDisplay:
_____ FAULT#32 _____
UnknownCUFault
FaultDescription
Anunknowncuttingunit/cuttingreelmotorfaulthasoccurred.Afaultreferencetableerrorexistswithinthe
TEC-5002software.
CircuitDescription
Thereferencetablesarestoredinthenon-volatilememoryoftheTEC-5002.
ConditionsforSettingtheFault
OnlyanerrorinthesoftwarecancausetheTEC-5002tosetthisfault.
RecommendedServiceActions
Step1:Verifythatthefaultrepeats.
1.ClearthesystemfaultsfromtheInfoCenter.RefertoClearingFaultsfromtheInfoCenter(page21).
2.Operatethemachine.
Pass
Thefaultdidnotrepeat.GotoReturningtheMachinetoService(page22)andfollowthestepslisted.
Note:Ifthefaultdoesnotrepeat,anisolatedeventhasoccurred.
Fail
Thefaultrepeated.ContacttheToroTechnicalAssistanceCenterforadditionalguidance.
Note:Youmustxthissoftwarefault;accomplishtheTEC-5002softwarerepairwithdirect
assistancefromT oro.
112