Toro Reelmaster 5010- H - Fault 24: Joystick Broken

Fault24:JoystickBroken
InfoCenterDisplay:
_____ FAULT#24 _____
JoystickBAD
FaultDescription
TheTEC-5002detecteda“cuttingunitraise”commandanda“cuttingunitlower”commandatthesame
timefromthejoystick.
CircuitDescription
Thereare2microswitchesforthejoysticklocatedonthecontrolarm.Therearswitchonthecontrolisusedto
lower(andengage)thecuttingunitsandthefrontswitchtoraise(anddisengage)them.
ConditionsforSettingtheFault
Theremustbeajoystickswitchbroken/shortedinternallyordamagedwiringtosendbotha“raise”and“lower”
commandsimultaneously.
RecommendedServiceActions
Step1:Verifythatthefaultrepeats.
1.ClearthesystemfaultsfromtheInfoCenter.RefertoClearingFaultsfromtheInfoCenter(page21).
2.Operatethemachine.
Note:T oraiseorlowerthedecksections,theoperatorseatmustbeoccupied.Also,tolowerthecuttingdeck
sections,thetractionspeedhastobeintheLOW(mow)range.
Pass
Thefaultdidnotrepeat.GotoReturningtheMachinetoService(page22)andfollowthestepslisted.
Note:Ifthefaultdoesnotrepeat,anisolatedeventhasoccurred.
Fail
Thefaultrepeated.GotoStep2.
Step2:Testthejoystickswitches.
1.GotoPreparingforTroubleshootingand/orT esting(page22)andfollowthestepslisted.
2.TestthejoystickswitchesaccordingtothecomponenttestingprocedureoutlinedinChapter5ofthe
5010-HServiceManual(Figure55).
81