Toro Reelmaster 5010- H - Toro DIAG - Quick Start

ToroDIAG-QuickStart
EnsurethattheT oroDIAGsoftwareandthedriversfortheToroDIAGCable(PartNo.115-1944)arealready
installedonyourPC.Iftheyarenotinstalled,gototheToroDIAGUser’sGuideandfollowthestepsinthe
ToroDIAGSoftwareInstallationsection.
Important:ThisprocedureassumesthattheToroDIAGCablehasbeenphysicallyconnectedtothe
PCatleastonceandthatthePChasfoundandrecognizedthecableas“NewHardware.”Ifthese2
actionshavenotoccurred,gototheToroDIAGUser’sGuideandfollowthestepsintheToroDIAG
CableInstallationsection.
FortheT oroDIAGsoftwaretoconnectbetweenthePCandthemachine,performthefollowingstepsexactly
aswritten:
1.Makesurethatthemachineisturnedoff.
2.TurnonthePC,butleavethemachineturnedoff.
Important:DonotstarttheToroDIAGsoftwareuntillaterinthisprocedure.
3.Verifythattheaccesspanelfromtheoutercoverofthecontrolarmhasbeenremoved(Figure9).
g036005
Figure9
1.Accesscover
4.ConnecttheToroDIAGCable(PartNo.115-1944)betweenaUSBportonthePCandtheseatharness
connectorP27(CANdiagnosticport)onthemachine(SeeFigure10and).
24