Toshiba B-SX6T Series - Real Time Clock (RTC) Setting

3. ON LINE MODE EO13-33002
3.7 Real Time Clock (RTC) Setting
3-12
3.7 Real Time Clock (RTC) Setting
This module holds the current time: year, month, day, hour, minute, second.
 How to perform the Real Time Clock Setting
(Continued on the next page.)
Yea
r
Month
Da
y
Turn on the printer. “ONLINE” will be displayed on the
LCD.
Press the [PAUSE] key to turn the printer to pause state.
The number of remaining print count
NOTE: When the [PAUSE] key is pressed during printing,
the number of remaining print count is displayed.
Hold down the [RESTART] key until the printer enters the
system mode.
When “<1>RESET” is displayed on the LCD, press the
[RESTART] key until “<8>RTC SET” appears.
Press the [PAUSE] key. The date currently stored in the
real time clock is displayed.
Pressing the [PAUSE] key enables changing the Year.
Set the Year with the [FEED] or [RESTART] key. Pressing
the [PAUSE] key fixes the Year and causes the cursor to
move to the Month.
Set the Month with the [FEED] or [RESTART] key.
Pressing the [PAUSE] key fixes the Month and causes the
cursor to move to the Day.
Set the Day with the [FEED] or [RESTART] key. Press the
[PAUSE] key to fix the Day. Then, the time currently stored
in the real time clock is displayed.
Power ON
ON LINE
B-SX8T Vx.x
[PAUSE]
PAUSE 52
B-SX8T Vx.x
Press and hold the [RESTART]
key for 3 seconds or longer.
<1>RESET
Press the [RESTART] key.
<8>RTC SET
[PAUSE]
<8>RTC SET
DATE 05/01/01
[PAUSE]
[FEED]
[RESTART]
<8>RTC SET
DATE Y 05
/01/01
[PAUSE]
[FEED]
[RESTART]
[FEED]
[RESTART]
<8>RTC SET
DATE M 06/01
/01
[PAUSE]
<8>RTC SET
DATE D 06/03/01
[PAUSE]
<8>RTC SET
TIME 00/00/00