Toshiba B-SX6T Series - Tool Menu

5.RFID ANALYZE TOOL EO13-33002
(Revision Date: Jul. 24, 2008)
5.3 Application Functions
5- 7
5.3.3 Tool Menu
(1) Port Open
Opens/closes a port to communicate with the printer.
•
“Serial PortOpen”: The printer port is ready to be opened. After the port is opened, “Serial PortClose”
will be displayed in the Tool menu and “Serial (Open)” will be displayed on the status bar.
• “Serial PortClose”: The printer port is ready to be closed. After the port is closed, “Serial PortOpen”
will be displayed in the Tool menu and “Serial (Close) will be displayed on the status bar
• “LAN Connect”: The LAN port is ready to be opened. After the LAN port is opened, “LAN DisConnect”
will be displayed in the Tool menu and “7:Connect” will be displayed on the status bar.
• “LAN DisConnect”: The LAN port is ready to be closed. After the LAN port is closed, “LAN Connect”
will be displayed in the Tool menu and “0:Close” will be displayed on the status bar.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Status Ba
r