Toshiba B-SX6T Series - Slant Line (3 Dots)

2. SYSTEM MODE EO13-33002
2.4 Test Print
2-54
2.4.4 Slant Line (3 dots)
Pressing the [PAUSE] key while SLANT LINE (3 DOT) is displayed causes the slant line patterns (3 dots) to
be printed.
 Print Sample of Slant Line (3 dots)
After printing is completed, the display returns to “<4>TEST PRINT”.
Pressing the [PAUSE] key causes the display to show “SLANT LINE (3DOT)” again. Then, press the
[FEED] key to display “CHARACTERS”.
SLANT LINE(3DOT)
(Magnified view: Print ratio 16.7%)