Toshiba B-SX6T Series System Mode Manual

2. SYSTEM MODE EO13-33002
2.3 Printer Parameter Fine Adjustment
2-35
2.3 Printer Parameter Fine Adjustment
 Outline of Printer Parameter Fine Adjustment
In the Printer Parameter Fine Adjustment mode, you can fine adjust each parameter, such as Print tone,
Print start position, Threshold, etc. which are set by the PC command. This is useful when using several
types of media by turns or when the print start position or cut/strip position is required to be fine adjusted.
The Printer Parameter Fine Adjustment menu contains the following.
Print Start Positino Fine Adjustment
Cut/Strip Position Fine Adjustment
Reverse Feed Amount Fine Adjustment
X Coordinate Fine Adjustment
Print Tone Fine Adjustment (Thermal Transfer)
Print Tone Fine Adjustment (Thermal Direct)
Ribbon Motor Drive Voltage Fine Adjustment (Take-up Motor)
Ribbon Motor Drive Voltage Fine Adjustment (Feed Motor)
Threshold Fine Adjustment (Black Mark Sensor)
Threshold Fine Adjustment (Feed Gap Sensor)
[PAUSE]
<3>ADJUST SET
FEED ADJ.+10.0mm
<3>ADJUST SET
CUT ADJ. +10.0mm
<3>ADJUST SET
BACK ADJ. +5.0mm
<3>ADJUST SET
X ADJUST +50.0mm
<3>ADJUST SET
TONE ADJ.<T> +3
<3>ADJUST SET
TONE ADJ.<D> -2
<3>ADJUST SET
RBN ADJ <FW> -10
<3>ADJUST SET
RBN ADJ <BK> -5
<3>ADJUST SET
THRESHOLD<R>1.0V
<3>ADJUST SET
THRESHOLD<T>1.4V
<3>ADJUST SET
[PAUSE]
[PAUSE]
[PAUSE]
[
PAUSE
]
[PAUSE]
[PAUSE]
[PAUSE]
[
PAUSE
]
[PAUSE]
[
PAUSE
]

Toshiba B-SX6T Series Specifications

General

Brand	Toshiba
Model	B-SX6T Series
Category	Printer
Language	English