Toshiba B-SX6T Series - Test Print

2. SYSTEM MODE EO13-33002
2.4 Test Print
2-47
2.4 Test Print
 Outline of Test Print
In the Test Print mode, you can print the test patterns and set print conditions for a test print. This is useful
to check the print quality of new media or ribbon.
The Test Print menu consists of the following:
Regular mode
Test pattern selection
<4>TEST PRINT
A
UTO PRINT(REFL)
<4>TEST PRINT
A
UTO PRINT(REFL)
<4>TEST PRINT
<4>TEST PRINT
A
UTO PRINT(TRAN)
<4>TEST PRINT
A
UTO PRINT(TRAN)
[PAUSE]
[RESTART]
<4>TEST PRINT
ISSUE COUNT 1
<4>TEST PRINT
PRINT SPEED 4”/s
<4>TEST PRINT
SENSOR TRANS.
<4>TEST PRINT
PRT TYPE TRANSFR
<4>TEST PRINT
TYPE[S] NO CUT
<4>TEST PRINT
LABEL LEN. 76mm
<4>TEST PRINT
PAPER FEED
[PAUSE]
<4>TEST PRINT
<4>TEST PRINT
PRINT CONDITION
<4>TEST PRINT
SLANT LINE(1DOT)
<4>TEST PRINT
SLANT LINE(3DOT)
<4>TEST PRINT
CHARACTERS
<4>TEST PRINT
BARCODE
<4>TEST PRINT
NON-PRINTING
<4>TEST PRINT
FACTORY TEST
<4>TEST PRINT
A
UTO PRINT(TRAN)
<4>TEST PRINT
A
UTO PRINT(REFL)
[FEED]
[RESTART]
[FEED]
[RESTART]
[FEED]
[RESTART]
[FEED]
[RESTART]
[FEED]
[RESTART]
[FEED]
[RESTART]
[FEED]
[RESTART]
[FEED]
[RESTART]
[PAUSE]
A
uto print mode
for factory test
(Black mark sensor)
[FEED]
[RESTART]
Regular mode
Print condition setting
[PAUSE]
[PAUSE]
Use the [FEED] or [RESTART]
key to select a desired option.
[PAUSE]
Use the [FEED] or [RESTART]
key to select a desired option.
[PAUSE]
Use the [FEED] or [RESTART]
key to select a desired option.
[PAUSE]
Use the [FEED] or [RESTART]
key to select a desired option.
[PAUSE]
Use the [FEED] or [RESTART]
key to select a desired option.
[PAUSE]
Use the [FEED] or [RESTART]
key to select a desired option.
[PAUSE]
The printer feeds one media, and
then prints 5 pcs. of the Slant Line
(3
do
t
s)
.
[PAUSE]
The printer prints 5 pcs. of the Bar
Code.
[PAUSE]
[PAUSE]
Use the [FEED] or [RESTART]
key to select a desired option.
The printer feeds one media.
Issue
<4>TEST PRINT
A
UTO PRINT(REFL)
[PAUSE]
The printer prints 5 pcs. of
characters.
<4>TEST PRINT
A
UTO PRINT(TRAN)
[PAUSE]
The printer prints 5 pcs. of
characters.
The printer feeds one media, and
then prints 5 pcs. of the Slant Line
(3 dots).
[PAUSE]
The printer prints 5 pcs. of the
Bar Code.