5.RFID ANALYZE TOOL EO13-33002
(Revision Date: Jul. 24, 2008)
5.3 Application Functions
5- 8
(2) CommSetting
Makes settings for communication between the PC and the printer.
NOTES: 1. In the case of the LAN interface, a socket communication is used.
2. Serial port may not be selectable depending on the printer types.
3. The above settings can be saved by a parameter save function.
(3) Internal Serial Setting
Makes settings for communication between the RFID module and the printer. Do not change the setting.
Port: COM1 to COM9
Baudrate: 2400, 4800, 9600,
19200, 38400, 115200
Data bit: 8 bit
Parity: NONE, EVEN, ODD
Sto
2
Flow control: NON, XON, XON/XOFF,
RTS/CTS+XON/XOFF
Baud rate: 2400, 4800, 9600,
19200, 38400, 115200
Data bit: 7 bit, 8 bit
Parity: NONE, EVEN, ODD
Stop bit: 1, 2
Printer IP Address
Socket Port No.
To Next Page
Loading...
