2. SYSTEM MODE EO13-33002
(Revision Date: Jul. 24, 2008)
2.1 Self-diagnostic Test
2- 6
NOTE: Print conditions:
Print speed: 4”/sec., Sensor: No sensor, Printing mode: Thermal transfer/Direct thermal
(*1)
, Media
length: 240 mm, Issue mode: Batch printing
(*1) Depends on the printing mode setting.
STABILIZER [ON]
UTO CALIB. [OFF]
LAN [ON SNMP ON]
PRTR IP ADDRESS [192.168.010.020]
GATE IP ADDRESS [000.000.000.000]
SUBNET MASK [255.255.255.000]
MAC ADDRESS [00-80-91-34-00-CC]
TTF AREA [1280KB]
EXT CHR AREA [ 256KB]
BASIC AREA [ 128KB]
PC SAVE AREA [ 128KB]
SOCKET PORT [OFF][08000]
BASIC [OFF]
BASIC TRACE [OFF]
DHCP [OFF]
DHCP ID [FFFFFFFFFFFFFFFFFFFF]
[FFFFFFFFFFFF]
DHCP HOST NAME [ ]
RTC BATT. CHK [ON]
RTC RENEWAL [PAGE]
RFID MODULE [U2]
RFID TAG TYPE [NONE ]
RFID ERR CHECK [OFF]
RFID RETRY [ 3]
RFID RD CYCLE [ 5] [2.0sec]
RFID WT CYCLE [ 5] [2.0sec]
RFID ADJ RETRY [+00mm]
RFID POWER LEV [ 18]
RFID AGC THR. [0]
RFID Q VAL [0]
RFID WT AGC [ 0]
RFID WT AGC MIN [ 0]
RFID WT OK TAGS 0
RFID VOID PRINT TAGS 0
(49)
(50)
(51)
(52)
(53)
(54)
(55)
(56)
(57)
(58)
(59)
(60)
(61)
(62)
(63)
(64)
(65)
(66)
(67)
(68)
(69)
(70)
(71)
(72)
(73)
(74)
(75)
(76)
(77)
(78)
(79)
(80)
(81)
-------------------------------------------------------------------------------
To Next Page
Loading...
