ll Rights Reserved
570 Ohito, Izunokuni-shi, Shizuoka-ken, JAPAN
Page
2.9.8 Maximum Number of RFID Write Retries ------------------------------------------------------------------ 2-80
2.9.9 RFIDWritre Retry Time-out------------------------------------------------------------------------------------ 2-81
2.9.10 RFID Adjustment for Retry ------------------------------------------------------------------------------------ 2-82
2.9.11 RFID Wireless Power Level Setting------------------------------------------------------------------------- 2-83
2.9.12 RFID AGC Threshold ------------------------------------------------------------------------------------------- 2-83
2.9.13 RFID Module Q Value Setting -------------------------------------------------------------------------------- 2-84
2.9.14 AGC Threshold for Data Write Setting---------------------------------------------------------------------- 2-85
2.9.15 AGC Threshold Lower Limit for Retry Setting ------------------------------------------------------------ 2-86
3. ON LINE MODE ------------------------------------------------------------------------------------------3- 1
3.1 Automatic Threshold Setting ---------------------------------------------------------------------------------3- 4
3.2 Reset Operation ---------------------------------------------------------------------------------------------------3- 5
3.3 Dump Mode ---------------------------------------------------------------------------------------------------------3- 6
3.4 BASIC Expansion Mode ----------------------------------------------------------------------------------------3- 8
3.5 Automatic Calibration Setting --------------------------------------------------------------------------------3- 9
3.6 LAN Enable/Disable Setting ----------------------------------------------------------------------------------3-11
3.7 Real Time Clock (RTC) Setting ------------------------------------------------------------------------------3-12
4. PROGRAM DOWN LOAD -----------------------------------------------------------------------------4- 1
4.1 Outline of Features -----------------------------------------------------------------------------------------------4- 1
4.2 Download Program Installation ------------------------------------------------------------------------------4- 1
4.2.1 System Requirements ------------------------------------------------------------------------------------------- 4- 1
4.2.2 Setup----------------------------------------------------------------------------------------------------------------- 4- 2
4.3 Firmware Download ----------------------------------------------------------------------------------------------4- 2
5. RFID ANALYZE TOOL ---------------------------------------------------------------------------------5- 1
5.1 System Requirement---------------------------------------------------------------------------------------------5- 1
5.2 Set up -----------------------------------------------------------------------------------------------------------------5- 2
5.3 Application Functions -------------------------------------------------------------------------------------------5- 3
5.3.1 Main Menu---------------------------------------------------------------------------------------------------------- 5- 3
5.3.2 File Menu ----------------------------------------------------------------------------------------------------------- 5- 4
5.3.3 Tool Menu ---------------------------------------------------------------------------------------------------------- 5- 7
5.3.4 Help Menu --------------------------------------------------------------------------------------------------------- 5-12
5.4 Operating Procedure--------------------------------------------------------------------------------------------5-13