2. SYSTEM MODE EO13-33002
(Revision Date: Jul. 24, 2008)
2.6 RAM Clear
2-65
Item Initial Value
Label pitch 76.2 mm
Effective print length 74.2 mm
B-SX6T-TS12-QM-R 170.6 mm Effective print width
B-SX8T-TS12-QM-R 213.3 mm
Printing mode Thermal transfer
Sensor type Feed gap sensor
Print speed 4”/sec.
Issue mode Batch print
PC save automatic calling ON
Basic interpreter OFF: Unavailable
Basic interpreter trace OFF: Unavailable
DHCP function OFF: Unavailable
RFID module type
NONE: No RFID kit is installed.
RFID tag type
NONE
RFID error tag detection
OFF
Maximum number of RFID issue retries
3
Maximum number of RFID read retries
5
RFID read retry time-out
4.0
Maximum number of RFID write retries
5
RFID write retry time-out
2.0
RFID adjustment for retry
+00mm
RFID wireless power level setting
18
RFID AGC Threshold Setting
0
RFID Q VAL (Q value)
0
RFID WT AGC (AGC threshold for data write)
0
RFID WT MIN AGC (AGC threshold lower limit for retry)
0
Number of successful RFID write
0
Number of failure in RFID write
0
NOTE: The initial values of Data length, Parity, Control code, LCD message language are different according
to the destination code.
To Next Page
Loading...
