6
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
ADJUSTMENT
6 - 7
(3) Select the media type.
Fig. 6-10
(4) Key in the adjustment value.
Fig. 6-11
(5) Press the [OK] button to finish the adjustment.
* Press the [CANCEL] button to return to the previous menu.
• Adjustment by direct code entry
As for the codes shown in the table below, the paper alignment at the registration roller can be adjusted
by a direct entry with the digital keys.
(For codes not shown in this table, perform the adjustment with the touch panel.)
To Next Page
Loading...
