Toshiba e-STUDIO556 - Page 550

e-STUDIO556/656/756/856(Ver03) © 2012 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 42
[E201] 1st drawer transport jam (paper not reaching intermediate transport sensor)
[E211] 2nd drawer transport jam (paper not reaching intermediate transport sensor)
[E301] 3rd drawer transport jam (paper not reaching intermediate transport sensor)
[E331] 4th drawer transport jam (paper not reaching intermediate transport sensor)
[E3C1] Tandem LCF transport jam (paper not reaching intermediate transport sensor)
[E261] Option LCF transport jam (paper not reaching intermediate transport sensor)
[E2A1] Transport jam during duplex printing (paper not reaching intermediate transport sensor)
Check item Measures
1st drawer transport sensor (S33) • Sensor check (Perform the input check: 03-[FAX]OFF/[1]/[C])
• Connector check
• Harness check.
Each transport clutch
(CLT5, 7, 9, 11)
• Clutch check (Perform the output check: 03-229/230/231/225)
• Connector check
• Harness check.
LGC board • Connector check (CN341)
• Board check.
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
1st drawer transport sensor
Each transport clutch
LGC board
Rollers
Classification Error item
Paper transport jam Paper not reaching intermediate transport sensor
Check item Measures
Intermediate transport sensor
(S17)
• Sensor check (Perform the input check: 03-[FAX]OFF/[1]/[A])
• Connector check
• Harness check.
Transport motor (M17) • Motor check (Perform the output check: 03-133, stop 03-183)
• Connector check
• Harness check.
1st drawer transport clutch (CLT5) • Clutch check (Perform the output check: 03-229)
• Connector check
• Harness check.
LGC board • Connector check (CN327, CN329)
• Board check.
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Intermediate transport sensor
Transport motor