8
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
ERROR CODE AND TROUBLESHOOTING
8 - 41
[E200] 1st drawer transport jam (paper not reaching registration sensor)
[E210] 2nd drawer transport jam (paper not reaching registration sensor)
[E300] 3rd drawer transport jam (paper not reaching registration sensor)
[E330] 4th drawer transport jam (paper not reaching registration sensor)
[E3C0] Tandem LCF transport jam (paper not reaching registration sensor)
[E220] 2nd drawer transport jam (paper not reaching 1st drawer transport sensor)
[E310] 3rd drawer transport jam (paper not reaching 1st drawer transport sensor)
[E340] 4th drawer transport jam (paper not reaching 1st transport sensor)
[E3D0] Tandem LCF transport jam (paper not reaching 1st drawer transport sensor)
Replace parts Remarks
Page memory
HDD
SYS board
LGC board
Classification Error item
Paper transport jam Paper not reaching registration sensor
Check item Measures
Registration sensor (S18) • Sensor check (Perform the input check: 03-[FAX]ON/[4]/[E])
• Connector check
• Harness check.
Intermediate transport sensor
(S17)
• Sensor check (Perform the input check: 03-[FAX]OFF/[1]/[A])
• Connector check
• Harness check.
Transport motor
• Motor check (Perform the output check:03-133/183)
• Harness check.
LGC board • Connector check (CN341)
• Board check.
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Registration sensor
Intermediate transport sensor
Transport motor
LGC board
Rollers
Classification Error item
Paper transport jam Paper not reaching 1st drawer transport sensor
To Next Page
Loading...
