e-STUDIO556/656/756/856(Ver03) © 2012 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 172
[4F10] System abnormality
Check item Measures
Setting
Check if the font to be deleted is registered (or preregistered) in this
equipment.
Classification Error item
Printer function error Printing was not performed successfully due to other abnormalities.
Check item Measures
Setting
1. Perform the job in error again. If the error still occurs, turn the power
OFF and then back ON, and perform the job again.
2. Collect the debug log with USB media.
P.8-3 "8.1.2 Collection of debug logs with a USB device"
3. Initialize HDD.
Refer to step 3 and later in "[E] Replace / Format HDD" in P. 9-11
"9.2.3 Precautions and procedures when replacing the HDD".