96
Specify the maximum number of the connections to the SSH server as 3:
TP-LINK(config)# ssh max-client 3
ssh download
Description
The ssh download command is used to download the SSH key file from TFTP
server.
Syntax
ssh download {v1 | v2 } key-file ip-address ip-addr
Parameter
v1 | v2 —— Select the type of SSH key to download, v1 represents SSH-1, v2
represents SSH-2.
key-file —— The name of the key-file which is selected to download. The length
of the name ranges from 1 to 25 characters. The key length of the downloaded
file must be in the range of 256 to 3072 bits.
ip-addr —— The IP address of the TFTP server.
Command Mode
Global Configuration Mode
Example
Download a SSH-1 type key file named ssh-key from TFTP server with the IP
Address 192.168.0.148:
TP-LINK(config)# ssh download v1 ssh-key ip-address 192.168.0.148
show ssh
Description
The show ssh command is used to display the global configuration of SSH.
Syntax
show ssh
Command Mode
Any Configuration Mode
Example
Display the global configuration of SSH:
TP-LINK(config)# show ssh
To Next Page
Loading...
Need help?
General
Weight and Dimensions
