TP-Link TL-SG5412F

169
show igmp-snooping multi-ip-list
Description
The show igmp-snooping multi-ip-list command is used to display the
Multicast IP table.
Syntax
show igmp-snooping multi-ip-list
Command Mode
Any Configuration Mode
Example
Display the Multicast IP table:
TP-LINK> show igmp-snooping multi-ip-list
show igmp-snooping filter-ip-addr
Description
The show igmp-snooping filter-ip-addr command is used to display the
Multicast Filter IP-Range table.
Syntax
show igmp-snooping filter-ip-addr
Command Mode
Any Configuration Mode
Example
Display the Multicast Filter IP-Range table:
TP-LINK(config)# show igmp-snooping filter-ip-addr
show igmp-snooping port-filter
Description
The show igmp-snooping port-filter command is used to display the
configuration of Multicast Port Filter.
Syntax
show igmp-snooping port-filter [port-num]
Parameter
port-num —— The port selected to display the configuration of Multicast Filter.