TP-Link TL-SG5412F

202
TP-LINK(config)# interface ethernet 8
TP-LINK(config-if)# no lldp tlv-select management-address port-vlan-id
show lldp global
Description
The show lldp global command is used to display the global configuration of
LLDP.
Syntax
show lldp global
Command Mode
Any Configuration Mode
Example
Display the global configuration of LLDP:
TP-LINK> show lldp global
show lldp interface
Description
The show lldp interface command is used to display LLDP configuration of the
certain port.
Syntax
show lldp interface [ethernet port]
Parameter
port —— The port selected to display the configuration of LLDP.
Command Mode
Any Configuration Mode
Example
Display the LLDP configuration of port 8:
TP-LINK> show lldp interface ethernet 8