TP-Link TL-SG5412F

170
By default, the configuration of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the Multicast Filter configuration of port 5:
TP-LINK> show igmp-snooping port-filter 5
show igmp-snooping packet-stat
Description
The show igmp-snooping packet-stat command is used to display the Packet
Statistics information of all ports.
Syntax
show igmp-snooping packet-stat
Command Mode
Any Configuration Mode
Example
Display the Packet Statistics information:
TP-LINK> show igmp-snooping packet-stat
show igmp-snooping packet-stat-clear
Description
The show igmp-snooping packet-stat-clear command is used to clear the
Packet Statistics information of all ports.
Syntax
show igmp-snooping packet-stat-clear
Command Mode
Any Configuration Mode
Example
Clear the Packet Statistics information:
TP-LINK> show igmp-snooping packet-stat-clear