TP-Link TL-SG5412F

43
TP-LINK(config)# interface link-aggregation 1
TP-LINK(config-if)# description “movie server”
show interface link-aggregation
Description
The show interface link-aggregation command is used to display the
configuration information of the Aggregate Arithmetic and the aggregation
group
s.
Syntax
show interface link-aggregation [group-num]
Parameter
group-num ——The LAG number, ranging from1 to 14. By default, the LAG
configuration information of all the Ethernet ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the LAG configuration information of all the Ethernet ports:
TP-LINK(config)#show interface link-aggregation