175
encryption method is used. By default, the Privacy Mode is none.
encrypt-pwd —— Privacy Password, ranging from 1 to 16 characters.
Command Mode
Global Configuration Mode
Example
Add User admin to Group group2, and configure the Security Model of the user
as v3, the Security Level of the group as authPriv, the Authentication Mode of
the user as MD5, the Authentication Password as 11111, the Privacy Mode as
DES, and the Privacy Password as 22222:
TP-LINK(config)# snmp user-add admin local group2 smode v3 slev authPriv
cmode MD5 cpwd 11111 emode DES epwd 22222
snmp community-add
Description
The snmp community-add command is used to add Community. To delete the
corresponding Community, please use no snmp community-add command.
SNMP v1 and SNMP v2c adopt community name authentication. The
community name can limit access to the SNMP agent from SNMP network
management station, functioning as a password.
Syntax
snmp community-add {name} { read-only | read-write } {mib-view}
no snmp community-add {name}
Parameter
name —— Community Name, ranging from 1 to 16 characters.
read-only | read-write —— The access rights of the community, with read-only
and read-write options.
mib-view —— The MIB View for the community to access.
Command Mode
Global Configuration Mode
Example
Add Community community1, and the community has read-write management
right to View view1:
TP-LINK(config)# snmp community-add community1 read-write view1
To Next Page
Loading...
Need help?
General
Weight and Dimensions
