48
Chapter 11 User Manage Commands
User Manage Commands are used to configure the user name and password for users to log on to
the Web management page with a certain access level so as to protect the settings of the switch
from being randomly changed.
user add
Description
The user add command is used to add a new user.
Syntax
user add user-name password password confirm-password
confirm-password {guest | admin} {disable | enable}
Parameter
user-name ——Type a name for users' login, which contains 16 characters at
most, composing digits, English letters and underdashes only.
p
assword ——Type a password for users' login, which contains 16 characters at
most, composing digits, English letters and underdashes only.
confirm-p
assword ——Type the password again.
guest | admin —— Access level.
Guest: only can view the settings without the right to
edit and modify.
Admin: edit, modify and view all the settings of different functions.
disable | ena
ble ——Enable/disable the user.
Command Mode
Global Configuration Mode
Example
Add and enable a new admin user named tplink, and of which the password is
password:
TP-LINK(config)#user add tplink password password confirm-password
password admin enable
To Next Page
Loading...
Need help?
General
Weight and Dimensions
