TP-Link TL-SG5412F

25
Command Mode
Global Configuration Mode
Example
Configure Global TPID of the VLAN-VPN as 8200:
TP-LINK(config)# vlan-vpn tpid 8200
vlan-vpn interface
Description
The vlan-vpn interface command is used to enable the VLAN VPN feature for
a specified port. To disable the VLAN VPN feature of this port, please use the
no vlan-vpn interface co
mmand. By default, the VLAN VPN feature of all ports
is disabled.
Syntax
vlan-vpn interface port-list
no vlan-vpn interface [port-list]
Parameter
port-list ——The port numbers needed to be edited or canceled.
Command Mode
Global Configuration Mode
Example
Enable the VLAN VPN feature for the ports 2-5,16-18:
TP-LINK(config)# vlan-vpn interface 2-5,16-18
vlan-vpn uplink
Description
The vlan-vpn uplink command is used to configure a specified port as the VPN
Up-link port. To cancel this VPN Up-link port, please use the no vlan-vpn
uplink command. By default, No port has been configured as the VPN Up-link
port.
Syntax
vlan-vpn uplink port-list