EasyManuals Logo

TP-Link TL-SG5412F Reference Guide

TP-Link TL-SG5412F
216 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #131 background imageLoading...
Page #131 background image
119
Parameter
auto —— Auto negotiation (default).
10h —— 10M half-duplex.
10f —— 10M full-duplex.
100h —— 100M half-duplex.
100f —— 100M full-duplex.
1000f —— 1000M full-duplex.
Command Mode
Interface Configuration Modeinterface ethernet / interface range ethernet
Example
Configure the Negotiation Mode as 100M full-duplex for Ethernet port5:
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# negotiation 100f
storm-control
Description
The storm-control command is used to configure the Storm Control function.
To disable the Storm Control function, please use no storm-control command.
Storm Control function allows the switch to filter broadcast, multicast and UL
frame in the network. If the transmission rate of the three kind packets exceeds
the set bandwidth, the packets will be automatically discarded to avoid network
broadcast storm.
Syntax
storm-control [bc-status enable|disable] [mc-status enable|disable] [ul-status
enable|disable] [rate rate]
no storm-control
Parameter
status —— Enable/Disable the Broadcast packets control, Multicast packets
control, or the UL-Frame control.
rate —— The maximum ingress rate of these tree types of packets. The packet
traffic exceeding the bandwidth will be discarded. The value of it can be 128 |
256 | 512kbps or 1 | 2 | 4 | 5 | 10 | 20 | 40 | 50mbps.
Command Mode
Interface Configuration Modeinterface ethernet / interface range ethernet

Table of Contents

Other manuals for TP-Link TL-SG5412F

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-SG5412F and is the answer not in the manual?

TP-Link TL-SG5412F Specifications

General IconGeneral
MAC address table8000 entries
Jumbo frames supportYes
Maximum data transfer rate1 Gbit/s
Supported data transfer rates10, 100, 1000Mbps
Fan0
Wi-FiNo
DiagnosticsVCT
Management platformSNMP, RMON, WEB/CLI/Telnet
Authentication method802.1X, Radius
Packet transfer speed17.99Mpps
Connectivity technologyWired
Networking standardsIEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Ethernet LAN data rates10, 100, 1000 Mbit/s
Copper ethernet cabling technology1000BASE-T, 100BASE-TX, 10BASE-T
DHCP featuresDHCP client
Security algorithmsSSH, SSL/TLS
Switch typeManaged
Switch layerL2
Console portRJ-45
Fiber optic connectorSFP
SFP/SFP+ slots quantity12
Basic switching RJ-45 Ethernet ports quantity4
Fiber ethernet cabling technology100BASE-FX
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Stackable-
Form factor1U
CertificationCE, FCC
Product colorBlack
Compatible operating systemsWindows 98SE, NT, 2000, XP, Vista, Windows 7\\r MAC OS\\r NetWare\\r UNIX\\r Linux
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth260 mm
Width440 mm
Height44 mm

Related product manuals